GIGABYTE Unveils Three New 'X299X' Motherboards For Cascade Lake-Xby Gavin Bonshor on October 3, 2019 2:00 PM EST
Back at Computex 2019, GIGABYTE had three new models of motherboards on display. These new motherboards at the time were almost mistaken for next-generation Intel boards, with GIGABYTE quickly rubbishing the rumours of a new chipset at the time, as they were marked with X299G. GIGABYTE has finally lifted the lid on the new models, with its launch and support for Intel's Cascade Lake-X HEDT processors. These boards are built on the same X299 chipset, and are called the the GIGABYTE X299X Designare 10G, X299X Aorus Xtreme Waterforce, and the X299X Aorus Master.
Two X's are Better Than One
The new GIGABYTE X299X models use the same previous LGA2066 chipset we've seen in the past, but with uprated componentry and controller sets. The extra X in X299X is to signify that these models are designed for the new Intel 10th generation HEDT Cascade Lake-X processors - this is not a new iteration of the X299 chipset.
Some of the new features of the motherboards include using Intel's 802.11ax Wi-Fi 6 wireless interface, most likely the Intel AX200, but this has yet to be confirmed. The GIGABYTE X299X Designaire is using Intel 10 GbE networking which offers two 10GbE ports on the rear panel; this is likely to be using Intel's X550-AT2 controller.
The GIGABYTE X299X Aorus Xtreme Waterforce with RGB virtually everywhere
One of the key features with these new models is that there are more PCIe lanes available from the Cascade Lake-X processors, as we move from 44 to 48. As a result of this, the GIGABYTE X299X Designaire 10G and slightly leaner X299X Aorus Master both have two full-length PCIe 3.0 slots which operate at x16, with the other two full-length slots running at both x8. By contrast, the beefier water block-clad and RGB-laden GIGABYTE X299X Aorus Xtreme Waterforce has an impressive three-full length PCIe 3.0 slots which all run at x16. This is one of the main benefits of using Intel's Cascade Lake-X processors with the new X299X models.
The GIGABYTE X299X Aorus Master is expected to be the cheapest of the three
GIGABYTE's new HEDT trio all feature 16-phase power deliveries with eight memory slots with support for quad-channel memory and allow users to install up to 256 GB of DDR4. With content creators in mind, GIGABYTE has stated that all three models will work well with NVIDIA's Quadro graphics cards, and users looking to build a Cascade Lake-X gaming system can use multiple graphics card due to SLI and CrossFire support. The top tier X299X Designaire 10G and X299X Aorus Xtreme Waterforce models include dual Thunderbolt 3 Type-C ports on the rear panel and solid native support for PCIe 3.0 x4 M.2 slots with support for Intel's VROC RAID technology.
The GIGABYTE X299X Designaire 10G with dual Thunderbolt 3 and dual 10 G Ethernet
While the new X299X models are all suited to content creators and enthusiasts, the X299X Designaire is the more professional of the three with its dual 10G networking and dual Thunderbolt 3 connectivity. The X299X Aorus Xtreme Waterforce is primarily designed for enthusiasts and overclockers looking to create a solid and monolithic water-cooled system with little to no restrictions on PCIe and NVMe storage when used with Cascade Lake-X processors. All three models feature Realtek ALC1220-VB HD audio codecs with ESS 9218 Sabre DAC's for improved and good quality onboard audio.
Pricing and availability are currently unknown, but with Intel's top Cascade Lake-X processor, the Core i9-10980XE expected to launch at under $1000, the high-core consumer market space looks set to be an interesting one for the remainder of 2019.
- Intel's Cascade Lake-X CPU for High-End Desktops: 18 cores for Under $1000
- Intel's X299 Goes Extreme, GIGABYTE X299G Xtreme Waterforce With 10G LAN, 16-Phase VRM
- ASUS Unveils the ROG Rampage VI Extreme Encore X299 Motherboard
- New GIGABYTE X299-WU8 Workstation Motherboard: Dual PLX8747, but Built for Core-X?
- Intel's Next-Generation 'Cascade Lake-X' HEDT CPUs Due in October
Post Your CommentPlease log in or sign up to comment.
View All Comments
stanleyipkiss - Thursday, October 3, 2019 - linkThe Designare is exactly what I was looking for in a pfsense router. Two 10gbe ports with a server-grade intel chipset -- no need to get a PCIe card (even though they are cheap now on ebay).
austinsguitar - Thursday, October 3, 2019 - linksounds like an unbelievably terrible purchase decision but eh, your money down the dump not mine <3.
PeachNCream - Thursday, October 3, 2019 - linkUnlike a commercial router, this will have RGB and angular plastic shrouds to go along with zero promise of sufficient backplane throughput. What's not to love about such a brilliant kludge of a solution to a non-problem?
imaheadcase - Thursday, October 3, 2019 - linkYah way overkill, i mean its a router for home use. If you really concerned with bandwidth, stop being a cheap old person and get a actual real router.
Great_Scott - Thursday, October 3, 2019 - linkBuying an HEDT system for a firewall is anything but cheap...
mooninite - Thursday, October 3, 2019 - link10Gbit! Yay!
UltraWide - Thursday, October 3, 2019 - linkDoes it also support 2.5GBASE-T and 5GBASE-T?
DigitalFreak - Thursday, October 3, 2019 - linkIf it's using the X550-AT2 controller then yes, but only in Linux for some stupid reason.
Great_Scott - Thursday, October 3, 2019 - linkHiding the 2.5 and 5GB capability until the chipset can be re-branded isn't that stupid a reason... after all, they can't charge more unless the name is updated.
shabby - Thursday, October 3, 2019 - linkWill the x299 boards get a price cut too?