The story of Qualcomm’s Arm server product line has been full of ups and downs. On the up, last year, we saw a large disclosure on how the new Falkor core design was put together, and Qualcomm even officially launched CPU pricing. It was going to be another push for Arm cores into the datacenter. Everything looked to be on an upwards path, until early 2018, when Qualcomm was looking to consolidate some of its divisions, and it was noted that a number of key members of the Centriq team had left. The official line is that Qualcomm was still going to support the product family, however any roadmap seemed to disappear.

We weren’t expecting to see any Qualcomm servers at the Supercomputing show this week. However when casually walking by the GIGABYTE server booth, they had one of the early PVT samples ready to show for customers.

On display was a H221-Q20 2-node 2U server using QDF2400 (Centriq) processors. Each processor is backed with 12-channel DDR4, which takes up a large portion of the motherboard. Other available parts include 4x1Gb/s, two management ports, twelve 3.5-inch hot swap bays, four M.2 slots for SATA drives, two PCIe low profile slots, four full PCIe slots, two OCP Mezzanine slots, a BMC, and 1200W Platinum redundant PSUs.

The system is still in the early stage of development. We were told to come back in the middle of next year for systems that would be ready to go.

Given that Qualcomm officially launched Centriq on November 10th 2017, that would mark 18 months after launch when GIGABYTE will have systems ready. Interestingly we were told that only GIGABYTE is the only manufacturer who is allowed to sell these systems into the channel, with everyone else being an OEM.

We’ve asked for one, when they’re ready to share.

Related Reading

Comments Locked


View All Comments

  • nismotigerwvu - Tuesday, November 13, 2018 - link

    Well that's certainly an unexpected sighting. Who knows, maybe next year you'll spot K12.
  • name99 - Tuesday, November 13, 2018 - link

    "On display was a H221-Q20 2-node 2U server using QDF2400 (Centriq) processors. Each processor..."

    What's the difference between 2-node and 2-socket? Wasn't the great flaw of Centriq, the misfeature that supposedly showed that QC did not know what they were doing, that it came in only a single-socket version?
  • alpha64 - Tuesday, November 13, 2018 - link

    From the picture, it appears the motherboard is very narrow. I think the design is two motherboards per 2U chassis. That would make it two "computers" or nodes per server.
  • stanleyipkiss - Wednesday, November 14, 2018 - link

    I think it's narrow because there are no hard drive bays. Where exactly are the 12 3.5 inch HDDs?
  • GreenReaper - Wednesday, November 14, 2018 - link

    There's no reason the motherboard *has* to take up the entire width of the case, and it's cheaper if it doesn't. The HDDs will likely be at the front, the end where the cables are, close to the memory.
  • Rabman - Tuesday, November 13, 2018 - link

    Minor correction -- QDF2400 has 6 channels of DDR4, with 2 DIMMs per channel.
  • IGTrading - Wednesday, November 14, 2018 - link

    This is good news, but Qualcomm unfortunately is quite late.

    They should have worked on some large scale partnerships for a few super/larger computing solutions for a few universities or institutions. The have a clear use case to show off ...

    God, I hope they don't fail. Between #AMD EPYC and Xeon, we really need more competition on the servers market (other than IBM Power and Fujitsu Custom super-cores) .

Log in

Don't have an account? Sign up now