The Look

For a few generations now, Huawei has been cultivating a specific look on its devices. The machined aluminium metal unibody combined with the gaps required for the antenna meant that the Mate S, the Mate 8, the Mate 9, and the P9 felt like part of the family. I didn’t get the same feeling with the base P10 models, and I also don’t get the same feeling with the Mate 10 either.  There are three immediate reasons I can think of.

First are the color choices. As I am writing this piece, I have only seen the Mate 10 and Mate 10 Pro in dark colors. When I put them side-by-side with other devices, it does not look significantly different.


Huawei P9, Huawei Mate 10, Huawei Mate 9, LG V30+

This is especially true in low light, and there’s no defining ‘Huawei’ feature. On the rear, the dark color again hides the fact that it is a Huawei device, aside from the perhaps odd way the dual cameras look. There is a band on some of the colors to signify a ‘strip’ where the cameras are, but this is not part of Huawei’s regular look. The strips we have seen to date come on the P9 and P10, not on the Mate units. One caveat to all this: when Huawei launched the P10 in ‘Greenery’, in collaboration with Pantone, it seemed odd at the time. But I can now pick that phone out of a crowd, it is so obvious. There is something to be said about being different.

A note on colors: the Mate 10 will be offered in Mocha Brown, Black, Champagne Gold, and Pink Gold. The Mate 10 Pro will be in Midnight Blue, Titanium Gray, Mocha Brown, and Pink Gold. The Mate 10 Porsche Design will be in Diamond Black only.

Second is the fingerprint sensor. This is perhaps more of a personal issue, but to date I have preferred rear fingerprint sensors. Moving to the front for the P10 put me off a little (especially in a dark color), and the fact that the regular Mate 10 now goes this way, with a thin fingerprint sensor, seems a little off-putting.

Third is the display. With most major smartphone manufacturers focusing on this ‘all-screen’ display technology, there leaves little room for individualization for the OEMs to make a mark. Apple, either by luck or by design, got this right. Despite the backlash on the iPhone X about that little notch for the cameras, there is no mistaking that a phone with a notch is an iPhone X. The Mate 10 and Mate 10 Pro do not have the same instantly recognizable look. How to make it obviously recognizable (and different to the iPhone) is for someone paid a lot more than me to think about, but it means the Mate 10 and Mate 10 Pro have the potential to be lost in the crowd. The P11 (if there is one next year) will have to do something on this front.

The Silicon: The Kirin 970

On the silicon side, at the heart of the new Mate 10 phones is the Kirin 970 SoC. The new Kirin 970 is fabbed at TSMC using its smartphone-focused 10nm process. We were expecting Huawei/HiSilicon to be the first SoC vendor to 10nm last year, but its release cycle was just before 10nm ramped up for mass production. The chip uses the same ARM Cortex-A73 and ARM Cortex-A53 cores as the previous generation, although this time running from more mature blueprints. For the last generation Huawei was the first to the gate with ARM’s latest cores, which had a bit of concern on the power side as shown in Matt’s review. ARM announced the next generation A75/A55 cores earlier this year, but in true ‘not ready yet’ fashion for Huawei, these designs are not ready for mass production.


A PCB mockup of the Kirin chip, alongside a 1.4 cm square Core i7 logo

Aside from the A73/A53 cores, the Kirin 970 uses ARM’s latest Mali G72 graphics, this time in an MP12 configuration. This means a base +50% gain for graphics cores, along with the improvements from G71 to G72, but the benefits of a ‘wider’ graphics engine typically allow running it at lower frequencies, nearer the power efficiency point, and saving power. In the game of silicon cat and mouse, balancing die size with cost and power, Huawei has gone for added cost/die size in order to reduce power consumption.

HiSilicon High-End Kirin SoC Lineup
SoC Kirin 970 Kirin 960 Kirin 950/955
CPU 4x A73 @ 2.40 GHz
4x A53 @ 1.80 GHz
4x A73 @ 2.36GHz
4x A53 @ 1.84GHz
4x A72 @ 2.30/2.52GHz
4x A53 @ 1.81GHz
GPU ARM Mali-G72MP12
? MHz
ARM Mali-G71MP8
1037MHz
ARM Mali-T880MP4
900MHz
LPDDR4
Memory
2x 32-bit
LPDDR4 @ 1833 MHz
2x 32-bit
LPDDR4 @ 1866MHz
29.9GB/s
2x 32-bit
LPDDR4 @ 1333MHz 21.3GB/s
Interconnect ARM CCI ARM CCI-550 ARM CCI-400
Storage UFS 2.1 UFS 2.1 eMMC 5.0
ISP/Camera Dual 14-bit ISP Dual 14-bit ISP
(Improved)
Dual 14-bit ISP
940MP/s
Encode/Decode 2160p60 Decode
2160p30 Encode
 
2160p30 HEVC & H.264
Decode & Encode

2160p60 HEVC
Decode
1080p H.264
Decode & Encode

2160p30 HEVC
Decode
Integrated Modem Kirin 970 Integrated LTE
(Category 18)
DL = 1200 Mbps
3x20MHz CA, 256-QAM
UL = 150 Mbps
2x20MHz CA, 64-QAM
Kirin 960 Integrated LTE
(Category 12/13)
DL = 600Mbps
4x20MHz CA, 64-QAM
UL = 150Mbps
2x20MHz CA, 64-QAM
Balong Integrated LTE
(Category 6)
DL = 300Mbps
2x20MHz CA, 64-QAM
UL = 50Mbps
1x20MHz CA, 16-QAM
Sensor Hub i7 i6 i5
NPU Yes No No
Mfc. Process TSMC 10nm TSMC 16nm FFC TSMC 16nm FF+

The third main metric for in the hardware is going to be its new ‘Neural Processing Unit’, or NPU. This is silicon dedicated to running artificial intelligence calculations and frameworks, in the form of neural networks. As with other task-specific processors, technically these AI tasks can be run on the CPU or GPU, but because an AI network can run at lower precision and have fixed calculation steps, by developing specific hardware it allows for higher performance at much lower power – the same basic rationale behind GPUs for graphics, ISPs for image processing, etc.

The IP for Huawei’s NPU comes from Cambricon Technologies, and from a high-level might be considered similar to NVIDIA’s Tensor Cores. We are under the impression the Huawei NPU runs several 3x3x3 matrix multiply engines, whereas the Tensor cores run 4x4x4. Huawei runs all this in 16-bit floating point mode, and has a listed performance of 1.92 TFLOPs. This is a relatively high number, and for reference is twice the throughput as what Apple quotes for its new Neural Engine found in the A11 Bionic processors for the iPhone 8 and iPhone X.

The latest unconfirmed reports I have seen put Huawei’s NPU at around 25-30% of the full silicon area. They are quoting ‘under 100 mm2’ for the total die size, and a total of 5.5 billion transistors. That comes out to a surprising 55 million transistors per square millimeter using TSMC’s 10nm process, which is double that of AMD’s Ryzen design, and even above Intel’s own 48MTr/mm2 estimate given at their manufacturing day.

If Huawei did not have an NPU, the die size would be a lot smaller, and here comes a fundamental fact as we move to even smaller process nodes (as in, physically smaller, rather than just a smaller number for a name): it becomes harder and harder to extract pure performance out of a non-parallel design. A chip designer either makes a smaller chip, or spends the transistors on dedicated hardware – either supporting a new video encoder algorithm, a new DSP, or in this case, hardware specifically for artificial intelligence networks.

Smartphone as a Desktop

I remember, almost ten years ago, one of Anand’s prophecies.  It went something like this:

“Give me a smartphone, with all my files, I can dock and use as a PC, and it will revolutionize personal computing.”

At the time, Anand predicted that Microsoft had all the key elements in place: an OS, a smartphone platform, and potentially a gaming platform in the Xbox. All Microsoft had to do was put them all together, although at the time they were focusing on other matters, such as Windows 8 and fixing Windows 8.

Initially we saw Windows RT running on ARM on some hybrid tablets, but the ecosystem did not bite. Eventually we saw Windows' Continuum functionality hit the scene to not a lot of fanfare. It required significant grunt, and we saw a device from Acer, a device from HP, and it also had a slow death.

Qualcomm are going to push the concept via the Windows on Snapdragon platform, using the Snapdragon 835. Qualcomm is working with Microsoft and combined they are working with most of the major laptop OEMs to provide ARM devices that can run almost a full-blown copy of Windows. These are still laptops though, and not Anand’s original vision of a smartphone.

Huawei is going to try and roll its own solution to this. When connecting to a TV, a custom Linux interface will spring up like a traditional desktop operating system, somewhat similar to Samsung's recently launched DeX feature. Bluetooth devices can be connected, and it will have access to all the standard Android apps. The smartphone itself can act as a trackpad for a mouse, or a keyboard, and be connected to something like the MateDock (sold alongside the original Matebook) for additional functionality such as Ethernet, more USB ports, and additional video outputs.

As the headlines for the Mate 10 will be around artificial intelligence, this feature is likely to be left into a footnote for now, similar to how DeX has been on the Galaxy S8 series. In order to get it off the ground, I suspect that Huawei will have to implement some type of ‘Desktop Dock’ that can allow for additional attachments as well as charging at the same time – at this point Huawei says that users will have to buy a splitter cable to support charging at the same time. This is the first generation, so there are some rough edges – it only supports displays at their native resolution up to 1920x1080 for now, and when using a Bluetooth device I did notice some lag. Other features, such as something similar to Windows Snap, should be high on the list.

The Mate 10, Mate 10 Pro, and Mate 10 Porsche Design Microsoft Translate: Artificial Intelligence and Application Lag
Comments Locked

103 Comments

View All Comments

  • polygon_21 - Monday, October 16, 2017 - link

    At least the 3.5mm socket is still there
  • Potato Cat - Monday, October 16, 2017 - link

    true (poking at apple again)
  • Dr. Swag - Monday, October 16, 2017 - link

    And Google
  • SetiroN - Monday, October 16, 2017 - link

    Actually, not on the pro, unfortunately.
  • Aberamati - Monday, October 16, 2017 - link

    The "Pro" model doesn't have a headphone jack.
  • protomech - Monday, October 16, 2017 - link

    From the article: "All three devices have a headphone jack"

    Maybe the article is wrong.
  • Aberamati - Monday, October 16, 2017 - link

    Yes the article is wrong. Look at the pictures. All other websites noted that the Pro doesn't have headphone jack.
  • Ian Cutress - Monday, October 16, 2017 - link

    That's my fault. I didn't notice on my hands on and our specification sheets didn't specify. We didn't get the promo photos in advance. I've updated the text.
  • Samus - Monday, October 16, 2017 - link

    It's difficult to have a reliable IP67 or better rating with a headphone jack. Sony learned this with the Xperia Z3, and hasn't released anything claiming to be "waterproof" since.

    Courage isn't the angle Apple should have taken. They should have simply said fluid dynamics. It has already been proven a headphone jack can be added to an iPhone 7, that there is physical space inside, contrary to what Apple claims.

    And before someone trolls this. I'm aware there are phones that have reliable waterproofing with a 3.5mm jack (the Kyocera Hydro for instance) but it's important to note there are patents on those headphone jack designs and, like manual transmissions, there are only a few ways to encase the internals without being patent trolled, and it appears the licensing fees from companies that hold those patents are prohibitive, otherwise we'd see more headphone jacks in IP67 phones. This is why there are only a handful of companies in the world that make manual transmissions (ZF, Getrag, VAG, Suzuki, Ford, Holden, etc)
  • Trixanity - Monday, October 16, 2017 - link

    Sony does have an IP68 rating with a headphone jack and Samsung does too - and have had that for a while now. Sony didn't have an uncovered USB port until Z5.

    What's changed is that they don't claim devices to be waterproof as there are no guarantees. Water resistant is a more accurate term anyway.

Log in

Don't have an account? Sign up now