Dell U2412M - 16:10 IPS without Breaking the Bank
by Chris Heinonen on February 28, 2012 9:00 AM ESTDell U2412M Design, OSD, and Viewing Angles
The look of the Dell is certainly utilitarian and not sexy. Unless you kept posters of 1980s-era minivans on your wall as a kid instead of a Porsche or Corvette, you are not going to find the U2412M to be an attractive display. But as we noted on the previous page, like those minivans, what it lacks in looks, it makes up for in utility.
Dell continues the menu system with four unlabeled buttons that control the OSD, and manages to make it fairly easy to navigate overall. I did hit the wrong button a couple times, so perhaps they could space them out a little more than they do, but overall the menu is easy to use and navigate. There is no switching between horizontal and vertical movements with the same set of buttons, which is a peeve of mine.
In our forums some users expressed concern about the anti-glare coating of the U2412M so I decided to pay extra attention to it. I have to say that I wasn’t bothered by it at all, and didn’t see anything to be concerned about. It certainly was nothing like the patterned retarder on passive 3D displays that drives me crazy from a close distance. If no one had mentioned the anti-glare coating to me then I wouldn’t have even noticed it was there. Perhaps I’m just not that sensitive to it yet and will become more so going forward.
Viewing angles are always a good area of performance for IPS panels, and you can see that in the included gallery. Overall the angles were good, with a loss of contrast at the extreme angles but nothing that you would notice in a normal working position, or even if someone was looking at your monitor for a presentation. Overall from a physical perspective the Dell was unexciting but didn’t cause any areas of concern that some other models have for me.
143 Comments
View All Comments
Death666Angel - Tuesday, February 28, 2012 - link
Honestly, if I had to chose between 16:9 with 1080p or 16:10 with 900p, I'd take 16:9. The real issue people argue is that the 24" market has gone 16:9 with 1080p. No gamer or other user would go with anything below 22" unless there are space constraints.piroroadkill - Wednesday, February 29, 2012 - link
The U2410 is not a budget screen by any measure, though, and although it is "old", it is not actually old. It is still being sold alongside the U2412, because the U2410 has a true 8-bit S-IPS panel, 10-bit processing, wider gamut (almost all of AdobeRGB) and a slew of inputs.It's still relevant.
seapeople - Wednesday, February 29, 2012 - link
Dude, nobody cares about your low resolution 16:10 screens.Only very strange aspect ratio freaks think 1440x900 is better than 1920x1080 anyway.
It's cool to see a budget 1920x1200 monitor out there.
Burner.Tom - Tuesday, February 28, 2012 - link
The direct competitor to reviewed Dell monitor is HP ZR2440w 24-inch LED Backlit IPS Monitor, not ZR24 - its the previous generation.PS: Dell isnt the LCD panel maker - its LG, probably model LM240WU8.
Burner.Tom - Tuesday, February 28, 2012 - link
HP ZR2440w 24-inch LED Backlit IPS Monitor - Overviewhttp://h18000.www1.hp.com/products/quickspecs/1414...
darwinosx - Tuesday, February 28, 2012 - link
The HP is a tad bit more expensive but a much better deal with much better service. I'm surprised the author didn't know this was actually the competitor for this Dell not the old HP monitor.cheinonen - Tuesday, February 28, 2012 - link
For competitors I was specifically search for other IPS/VA panels with 1920x1200 resolution that were within $75 (or 25%) of the price of the Dell. The only model that came up at the time of searching was the older HP, which is why it was listed. There are a lot of other 16:10 IPS/VA panels, but once you got past being within 25% of the price, I didn't consider them direct competitors anymore.Burner.Tom - Tuesday, February 28, 2012 - link
U2412M and ZR2440w are direct competitors from hardware point of view (LCD panel) but the price is really better in Dell case.In Slovakia, its 253€ for Dell and 350€ for HP, both have 36 months On-site warranty. The question is - why is HP so expensive? I guess there must be something cheaper used in Dell monitor (power circuit, controller board, ...). Who is OEM of the Dell? ZR24w and ZR2440w are made by Tatung.
JarredWalton - Tuesday, February 28, 2012 - link
Wait, what makes the HP a "much better deal"? I'd call service of HP and Dell monitors pretty close to equal, and the HP is $50 more for the lowest price I can find. 15% more is only "a bit more"? They're both eIPS AFAICT, so other than the nebulous "service and support" aspect, why would one be better than the other?Touche - Tuesday, February 28, 2012 - link
HP has more inputs, a scaler for 1:1, thus can be hooked up to consoles, and better RTC control. The latter makes it a bit more responsive, but former to have higher input lag. Comparing several reviews, HP tends to have better uniformity.