Visual Inspection

The ASRock X570S PG Riptide uses a more neutral color scheme with black and silver throughout, including the rear panel cover, the M.2 heatsink, and the chipset heatsink. Built into the passively cooled chipset heatsink is an illuminated PG (Phantom Gaming) logo, which can be customized via the ASRock Polychrome RGB software. Users looking to add extra RGB can do so via two addressable RGB and two regular RGB headers.

For cooling, ASRock includes seven 4-pin headers in total, with one designated as a CPU fan, one for an optional CPU fan and water pump, and five for chassis fans and water pumps. Other notable headers include a 5-pin Thunderbolt AIC card header, a front panel USB 3.2 G2 Type-C header, two USB 2.0 headers (four ports), and two USB 3.2 G1 Type-A headers (four ports).

Dominating the lower section of the board is plenty of PCIe real estate for a budget board. This includes three full-length PCIe 4.0 slots that can operate at x16/x4/x2, with three smaller PCIe 4.0 x1 slots. For storage, ASRock has one PCIe 4.0 x4 M.2 slot, one PCIe 4.0 x4 with SATA support, and six SATA ports with support for AMD RAID 0, 1, and 10 arrays. The top-mounted PCIe 4.0 x4 slot includes an M.2 heatsink, while the second slot does not. ASRock also has its patent-pending graphics cardholder, which helps reduce sag from heavy graphics cards.

In the top right-hand corner of the board are four memory slots with support for up to 128 GB. In terms of speed, the PG Riptide supports memory with speeds of up to DDR4-5000 out of the box when used with a Ryzen 5000 series processor.

Looking at the power delivery on the X570S PG Riptide, ASRock is advertising a 10-phase design. Dissecting it, the power delivery is controlled by a UPI UP9595S PWM controller operating in a 4+2 configuration. ASRock includes eight Vishay SIC654 50 A power stages with dual UPI UP1911R smart PWM doublers for the CPU section, making it a doubled 4-phase design from a technical standpoint. On the SoC section, ASRock is using two independently operated Vishay SiC654 50 A power stages. It's not as over-engineered as some power deliveries, but for the price point, it's more than enough to operate Ryzen 5000 without issues.

ASRock is using a simple power delivery heatsink which doubles up as the board's rear panel cover. The design is more about catching passive airflow over high levels of mass, which means it should handle an overclocked processor as this is the only section of the VRM the heatsink covers. The SoC section of the power delivery is solely reliant on passive airflow directly over the bare power stages.

Focusing on the audio section of the board's components, ASRock uses a Realtek ALC897 HD audio codec, which is aging, yet still entirely acceptable for an entry-level model today. Assisting the HD audio codec are four Japanese gold Nichicon audio capacitors, with a front panel header available for users to use. There is also a small line of separation between the audio PCB and the rest of the board.

The rear panel of the ASRock X570S PG Riptide is one USB 3.2 G2 Type-C, one USB 3.2 G2 Type-A, four USB 3.2 G1 Type-A, and two USB 2.0 ports. Also present is a PS/2 combo port for legacy peripherals, five 3.5 mm audio jacks, and S/PDIF optical output powered by a Realtek ALC897 HD audio codec, as well as a single HDMI 2.1 video output for users looking to utilize AMD's Ryzen APUs. ASRock includes a blanking plate for the installation of an M.2 Key E Wi-Fi adapter, while a small BIOS Flashback button finishes off a modest rear panel.

What's in The Box

The main bulk of the accessories within the ASRock X570S PG Riptide box include a pair of SATA cables, ASRock's graphics card holder, three M.2 screws, and one M.2 standoff. There is also a quick installation guide, a software and drivers installation disc, and a rear I/O shield.

  • Quick installation guide
  • Software/Driver installation disc
  • 2 x SATA cables
  • 3 x M.2 installation screws
  • 1 x M.2 standoff
  • ASRock Graphics Card Holder
  • 2 x Velcro cable ties
  • Rear I/O shield
  • ASRock case badge
ASRock X570S PG Riptide Overview BIOS And Software
Comments Locked


View All Comments

  • Calin - Monday, October 25, 2021 - link

    And if your soldered-on SSD breaks, you need to replace the entire device.

    I'm using an HP 8200 (I think) with third generation i3 and - originally - a 320 (I think) GB hdd.
    It runs with 3TB plus 1TB plus one 120GB SSD.
    With 320GB only of storage, I would have thrown it long ago.
  • Robberbaron12 - Wednesday, October 27, 2021 - link

    I expect this is the future for "mobile" CPUs, a mega SOC with Ram and a SSD soldered on and then everything else connected over PCI-E
  • Person5e9 - Friday, October 22, 2021 - link

    Can someone, preferably asrock or gigabyte, please make an x570s m-atx. Lots of people would buy one in this underserved category for the smaller size and greater expansion (RAM and slots). Thanks!
  • TheinsanegamerN - Saturday, October 23, 2021 - link

    Why? B550 already exists, so you get PCIe 4.0 for a M.2 SSD and the GPU. You dont get more RAM slots with X570 VS B550.

    Is having 4.0x1 slots that important?
  • Calin - Monday, October 25, 2021 - link

    4.0 1x slots might be more valuable than 4.0 x16 slots, as most computers won't come even close to filling up a 3.0 x16 slot.
  • ipkh - Sunday, October 24, 2021 - link

    What's with the crappy Tidepods++ graphic for?
    It's rather crass and shouldn't be there as it has nothing to do with the article.
  • Harry_Wild - Sunday, October 31, 2021 - link

    All these board manufacturers should concentrate on the itx size motherboards for the mini PC cases, 12" X 7" X 10". Boards are 6.7" X 6.7" in size!
  • atragorn - Sunday, November 14, 2021 - link

    If there was sufficient demand they would be doing so already. Most people view these things colored by their own needs or desires, What I want or need is what everyone wants/needs. Which is simply not true. If most people wanted ITX systems the store shelves would be FULL of ITX systems.
    Whats on the shelves is what most people want/need. When that changes so will they. They do a lot of research to find out what they should be making. Hint its what people will buy.
  • dailyprimenews - Tuesday, December 28, 2021 - link

Log in

Don't have an account? Sign up now