ASRock B550 PG Velocitá

The new Velocitá branding from ASRock, as started on Z490, is an attempt to define a high-end motherboard based on speed, but also style, hence the name ‘Velocitá’. In previous incarnations, ASRock motherboards would often show pictures of high performance sports cars that eerily looked very close to the popular Lamborghini of the day, but those boards were focused on overclocking. This time Velocitá is more about the gaming, hence it falls under the Phantom Gaming family.

The PG Velocitá is a relatively clean board to look at, with the main style focused on a 45-degree downward slope from left to right, and a number of jagged edges on decals around the motherboard. As we can see, there is also some element of RGB here, on the chipset heatsink and on top of the rear panel. There is also a pair of onboard RGB headers at different ends of the board.

The power delivery heatsinks in the Velocitá are connected via a heatpipe, hiding a 12+2 phase design indicative of which market ASRock wants to push this product. Powering the CPU is an 8-pin and a 4-pin, while the socket area has access to five 4-pin fan headers within easy reach.

Down the right side of the motherboard is a Type-C front header, a USB 3.0 front header, six SATA ports from the chipset, and a two digit debug. Along the bottom are more fan headers, two USB 2.0 headers, power/reset buttons, and a front panel connector.

For the PCIe layout, the top full-length slot is a PCIe 4.0 x16 slot from the CPU, while the second full-length slot is a PCIe 3.0 x4 from the chipset. Surprisingly both of these have additional reinforcement. There is also a PCIe 4.0 x4 M.2 slot above the top PCIe slot for the main M.2 drive, and ASRock puts another PCIe 3.0 x2 M.2 slot on the bottom of the motherboard, and this heatsink is connected to the chipset heatsink.

The audio on the right of the motherboard is an enhanced Realtek ALC1220 design, featuring an NE5532 amp.

The rear panel gives the user a HDMI port, a combination PS/2 port, two USB 3.2 Gen 1 ports, four USB 2.0 ports, a Type-A USB 3.2 Gen 2 port, a Type-C USB 3.2 Gen 2 port, a Realtek RTL8125BG 2.5 gigabit Ethernet port, space for an add-in Wi-Fi antenna output, and the audio jacks.

ASRock B550M Steel Legend ASRock B550 Phantom Gaming 4 + 4ac
Comments Locked

101 Comments

View All Comments

  • Ghan - Tuesday, June 16, 2020 - link

    Right now, it seems more like B for Backordered. They may be priced a bit high, but the demand still seems to be there.
  • yannigr2 - Tuesday, June 16, 2020 - link

    This is a great article but it needs a follow up with a table for every motherboard explaining how they use the PCIe lanes in conjunction with M2 and SATA slots. It seems that motherboard makers are totally f up(sorry for the expression) the more reasonably priced models in that area.
  • romrunning - Tuesday, June 16, 2020 - link

    Does anyone know if the boards that have the Intel i225-V are shipping with the fixed hardware (v2)?
  • R3MF - Tuesday, June 16, 2020 - link

    +1
  • mooninite - Tuesday, June 16, 2020 - link

    Wow, another broken Intel NIC? I wish motherboards would stop using Intel NICs.
  • mooninite - Tuesday, June 16, 2020 - link

    After Googling it looks like v2 is not fixed either... a v3 is coming out. Time to buy Realtek.
  • romrunning - Wednesday, June 17, 2020 - link

    Which is hilarious - I remember when Realtek was the worst when it came to NICs, and Intel/3Com was the standard. :)
  • WaltC - Wednesday, June 17, 2020 - link

    Yes, indeed...;) My x570 Master has an Intel gigabit & a realtek 2.5gb. It's amusing because my interface is an EWAN that tops out at 1Gb, but I thought I'd try the realtek just to see and then I forgot about it...;)...Seems every bit as stable as the Intel--still on it, lol...;) Six of one, half-dozen of another.
  • eastcoast_pete - Tuesday, June 16, 2020 - link

    Thanks Ian and Gavin! One question, related to a likely use case for B550 mini ITX or mATX Boards: is it true that AMD will, at least initially, limit Ryzen 4000 APUs to OEMs? If that is so, I am definitely not interested in a B550 board in those form factors, and I don't think I am alone here. An answer is appreciated - thanks!
  • mrvco - Tuesday, June 16, 2020 - link

    I'm just here for the Next mini-ITX boards. I'm liking the Aorus Pro AX quite a bit.

Log in

Don't have an account? Sign up now