Transcend Launches New PCIe M.2 SSDs: The MTE850 Seriesby Anton Shilov on April 4, 2017 1:00 PM EST
Transcend has announced its first SSDs based on 3D MLC NAND flash memory. The MTE850-series drives are aimed at the higher-end of the market and promise up to 2.5 GB/s sequential read speed along with endurance-related advantages of 3D NAND.
Transcend does not disclose exact specifications of all its new MTE850 series SSDs, but only shows their pictures as well as performance numbers for the flagship 512 GB model. The images reveal a controller covered with an aluminum heat spreader, and the only contemporary controller that supports 3D NAND and comes with such a heat spreader is Silicon Motion’s SM2260 (which uses two ARM Cortex cores and has eight NAND flash channels) Technically the SM2260 can support LDPC ECC technology and 256-bit AES although this has to be enabled in firmware. At present, only Micron sells SSD-graded 3D MLC NAND to some of its partners, so it is logical to assume that the MTE850 drives use Micron. Transcend is the third company to offer an SSD family featuring 3D MLC and SM2260 after ADATA and Mushkin, so the drives are going to have rivals that offer similar performance and functionality.
Transcend’s MTE850 family consists of three models with 128 GB, 256 GB and 512 GB capacities that come in M.2-2280 form-factor and use a PCIe 3.0 x4 interface. The manufacturer rates MTE850’s sequential read performance at up to 2.5 GB/s and its write performance at up to 1.1 GB/s when pseudo-SLC caching is used. When it comes to random performance, Transcend does not publish any numbers at all, but we know that the SM2260 controller is officially capable of up to 120K/140K 4KB read/write IOPS, although the final value for these drives will be firmware dependent.
|Transcend MTE850 Specifications|
|Capacity||128 GB||256 GB||512 GB|
|Controller||Silicon Motion SM2260|
|NAND Flash||3D MLC NAND|
|Form-Factor, Interface||M.2-2280, PCIe 3.0 x4, NVMe 1.2|
|Sequential Read||?||?||2.5 GB/s|
|Sequential Write||?||?||1.1 GB/s|
|Random Read IOPS||?||?||?|
|Random Write IOPS||?||?||?|
|DRAM Buffer||Yes, capacity unknown|
|TCG Opal Encryption||No|
|Power Management||DevSleep, Slumber|
The MTE850 SSDs are expected to follow performance trends (the drives are somewhat comparable to Samsung’s 950 Pro released in 2H2015), and it is noteworthy that Transcend became the fourth independent SSD supplier after ADATA, Mushkin and Palit to introduce 3D NAND-based SSDs. We are still a few months away from a wide availability of 3D NAND-powered drives from independent vendors, but such products are getting announced today - we expect to hear more at Computex in June.
Transcend did not disclose MSRPs for its MTE850 drives, but since the SSDs have direct competitors based on the same memory and controller (ADATA’s XPG SX8000-series at $90-$242), it is highly likely that Transcend’s SSDs will be offered at similar price points. The MTE850 drives will be covered by the manufacturer's three-year warranty.
Post Your CommentPlease log in or sign up to comment.
View All Comments
lazarpandar - Tuesday, April 4, 2017 - linkzzzzz.........
waiting for some competition for Samsung in the multi-terabyte space
ddriver - Wednesday, April 5, 2017 - linkYeah, samsung is like a good 2 years ahead of the competition, and they don't even try that hard...
Magichands8 - Tuesday, April 4, 2017 - linkM.2? But, why?
shabby - Tuesday, April 4, 2017 - linkWhat else is there? You want some more sata ssd's?
vladx - Tuesday, April 4, 2017 - linkWell there's U.2 as well for PCIe SSDs which has the advantage of better cooling the drive.
jordanclock - Tuesday, April 4, 2017 - linkAre there really scenarios where heat has been a concern for M.2 drives in consumer uses? I know I haven't had any, but that's just one anecdote.
ddriver - Wednesday, April 5, 2017 - linkSamsung's NVME drives are known to throttle on prolonged sequential operations. It has somewhat been reduced on the 960 via the copper tape, but it will still throttle if you push it.
That being said, it is highly unlikely that a consumer would ever get into a scenario that involves the rapid transfer of so much data in so little time, as we are talking hundreds of gigabytes at the drive's peak throughput.
But then again, a consumer is also not likely to experience any sort of benefit from such a fast SSD that it would need to throttle. So the price premium is not justified either. Prosumers would be the ones mostly interested in uber fast storage, and willing to pay the price premium, and there in some, albeit a few workloads, it is possible to get the drive throttling while doing something practically useful.
ddriver - Wednesday, April 5, 2017 - linkM2 has very big form factor advantage, it would be stupid to make it in any other format, as that would greatly limit the devices you can put the SSD into. If you are putting it inside a PC, then you will have ample space to simply glue a small heatsink using thermally conductive double sided tape.
rpg1966 - Wednesday, April 5, 2017 - linkOn True, but on some motherboards the M2 slot is right underneath a graphics card etc, where there's not ample space.
ddriver - Wednesday, April 5, 2017 - linkThere is still enough clearance for enough of a heatsink to do the job.