Seagate and Micron Announce 1200.2, S600DC SAS SSD Families for Enterpriseby Billy Tallis on August 4, 2015 8:30 AM EST
- Posted in
- Enterprise SSDs
Today Seagate and Micron are jointly announcing their latest generation of Serial Attached SCSI (SAS) MLC SSDs for enterprise use. The new families of drives are designed to significantly broaden the Enterprise SSD lineup of both companies with a wider range of capacities, features, and performance options, for with up to 36 new drive models altogether.
Making today's announcement particularly different (and wordy) is the fact that both companies are announcing the same drives under their own brands. Developed in a joint partnership between the two companies, Seagate and Micron have developed a single line of drives to be sold under different brands by each manufacturer for the purpose of making the drives available from multiple vendors for second-sourcing needs. For Seagate these drives will be known as the 1200.2 series, and will total 36 drives altogether. Meanwhile for Micron these drives will be known as the S600DC series.
We'll start things off with Seagate, who has released the most information on these new drives. In Seagate's 1200.2 lineup the drives are available in four different tiers that trade cost against the higher endurance and performance, enabled through greater over-provisioning. The “High Endurance” line (rated for 25 drive writes per day) is tuned for write-intensive workloads and lots of random I/O. The “Mainstream Endurance” line (10 DWPD) is intended for a workload with a 70/30 mix of reads and writes, while the “Light Endurance” (3 DWPD) and “Scalable Endurance” (1 DWPD) are for very heavily read-intensive workloads with mostly sequential I/O.
Capacity options vary between the different tiers: the HE drives are available in only two smaller sizes (200GB and 400GB), the SE drives in two large sizes (1920GB and 3840GB), and the middle two tiers offer more choices between those extremes. As is often the case, the smallest drives in each tier have somewhat lower performance ratings, which causes the 200GB HE drive to be rated a bit slower than the three largest ME drives. All models are using the same platform - that is the same controller and NAND - and Seagate isn't binning the Micron MLC flash chips between tiers, so all of the performance differences stem from the differences in firmware configuration and the amount of over-provisioning.
|Seagate 1200.2 SAS SSD specifications|
|Capacities (GB)||200, 400||400, 800, 1600, 3200||400, 480, 800, 960, 1600, 1920, 3200, 3840||1920, 3840|
|Sequential Read||1800 MB/s||1800 MB/s||1750 MB/s||1700 MB/s|
|Sequential Write||600-800 MB/s||600-800 MB/s||390-750 MB/s||500 MB/s|
|4kB Random Read||205k-210k IOPS||205k-210k IOPS||170k-190k IOPS||140k IOPS|
|4kB Random Write||70k IOPS||66k-70k IOPS||35k IOPS||15k IOPS|
|Average latency||115 µs|
|Endurance||25 DWPD||10 DWPD||3 DWPD||1 DWPD|
All drives use a dual-channel 12Gbps SAS connection, and these are the first 12Gbps drives that can use the two channels in tandem for higher performance rather than fault tolerance. This enables peak sequential read speeds of 1700 MB/s to 1800 MB/s, compared to the single-channel limit of 1200 MB/s. Peak 4kB random read speeds are also great looking, ranging from 140,000 IOPS to 210,000 IOPS. Advertised write speeds are nothing special, but the SAS interface does allow almost all of the drives to exceed the capabilities of 6Gbps SATA for sequential writes.
Rounding out the enterprise feature set, every drive is available in a self-encrypting model, and the ME models are also offered in variants with FIPS 140-2 validated encryption. The drives have full power-loss protection and a 5 year warranty. All models use the 2.5” form factor. Drives under 1TB are 7mm thick while the larger models are 15mm thick.
Meanwhile for the Micron S600DC branded release of these drives, we don't have quite as much information for today's announcement. We know that Micron will be releasing three different models of the drive as the S610DC, the S630DC, and the S650DC. However we don't know which models are the higher endurance models and which are the higher capacity models.
Overall, the fact that Seagate and Micron are entering into a second-sourcing partnership on SSDs here is an interesting one, and one that makes a lot of sense given the desire for multiple sources from enterprise customers. And to be clear, this is true second-sourcing for as much as Seagate and Micron can achieve it, making it more than just both companies selling the drives under their own brands. In order to ensure a second-source supply, the two companies are using second-sourcing wherever practical in their supply chain and have geographically-diverse stockpiles for the important components that are only available from a single source, so they are confident they can offer a reliable ongoing supply.
Finally, we're told that the drives will be on display this month, with Seagate planning on publicly demonstrating the 1200.2 SSD next week at Flash Memory Summit. As for availability, Seagate tells us that the 1200.2 series will be shipping to channel partners starting this month.
Post Your CommentPlease log in or sign up to comment.
View All Comments
neo_1221 - Tuesday, August 4, 2015 - linkNot really an additional body - Kristian Vatto just left AT, so I'm assuming Billy is his replacement for SSD coverage.
Agent Smith - Tuesday, August 4, 2015 - linkAll the old school Anandtech team are disappearing one by one. I smell a site change coming...
Kristian Vättö - Tuesday, August 4, 2015 - linkI would say there has never been an old school AnandTech team, besides Anand himself of course. Usually editors have been around for 3-5 years before being poached by an industry company. Brian, Vivek, Dustin, Raja, Gary, Christopher etc. are all former AnandTech editors that now work at the companies we deal with, so I'm really no exception to the rule. Anand's retirement and the Purch acquisition aren't related to my departure and as a matter of fact in was in discussions with Samsung before the acquisition even happened (we didn't get a heads up about that, so we knew when you knew).
Don't get me wrong, AnandTech is an excellent place to work for and I enjoyed every second of it, but the career options are very limited compared to what a major corporation can offer. I couldn't imagine a better place to work for as a student because working from home as a freelancer is so flexible and the money is also decent, but at as one gets closer to graduation one must consider the long-term plan.
Frankly, I was already at the highest level I could reach by being a Senior Editor responsible for SSD coverage. At 21, that's no doubt a nice title and responsibility, but it's not something I saw myself doing for the next 50 years. I'm graduating next year and I know that once I'm out of uni I want to be in a more 9-to-5-like job with the possibility of moving up the corporate ladder, and now I was given an opportunity to secure my future employment along with a pretty good part-time remote gig to keep me fed while I finish my degree. As much as I liked working for AnandTech and interacting with the readers, it ultimately boiled down to making a rational decision of what is the best for me and my future.
This doesn't mean that the site is changing, not at all. I've trained Billy and will continue the process in the background to make the transition as seamless as possible. That's no different from when Anand put me in the driver's seat for SSD reviews, although unfortunately this transition is a bit faster than we hoped for. Given how huge impact AnandTech has had in my life, it will always have a special place in my heart and I will make my best effort to support the site and keep it as the amazing resource it is today.
Gigaplex - Tuesday, August 4, 2015 - linkI don't think they properly understand the concept of second-sourcing. This is just a single line of drives with two separate labels. If something happens at the manufacturing plant, both labels will be affected.
Billy Tallis - Tuesday, August 4, 2015 - linkThey readily admit that their supply chain isn't entirely dual-sourced, but I think (not sure) that drives are being assembled in more than one place and they definitely said they've got stockpiles in more than one place for the components that aren't second-sourced. Seagate and Micron obviously both have their own facilities for manufacturing the drives that predate this partnership.
The main point that they want to get across seems to be that these products aren't as vulnerable to what happened with the 2011 Thailand flooding, and Seagate is confident that the measures they've taken to ensure the supply will count for something with their enterprise customers.