Analysing AMOLED Power Efficiency Improvements
by Andrei Frumusanu on June 23, 2015 8:00 AM EST- Posted in
- Smartphones
- Displays
- Samsung
- Mobile
- AMOLED
Over the last few years we’ve been repeatedly reporting how Samsung was able to improve AMOLED power efficiency by employing better emitter materials on each new device generation. This went largely unverified as nobody really tried to accurately measure the actual power consumed by the screen. To rectify this situation, I went ahead to try to measure the screen power consumption of the last 4 generations of Galaxy S devices to get a better understanding just how much emitter improvements have contributed to screen and device battery efficiency.
AMOLED screens are emissive displays, meaning they emit light on their own without having to resort to backlights in transmissive technologies such as LCD screens. This causes white to be the most power-intensive color for an OLED screen to display because it requires all sub-pixels to operate at high emission. The advantage of OLED screen though is that for dynamic content, the technology is able to save power in comparison to transmissive displays because only the pixels which are actually used are powered up.
Because white is a worst-case power scenario, it serves well as good representation of general efficiency gains in OLED devices. I've noticed that the power composition of the display consists of the sum of individual component’s power, and was able to verify this on the Galaxy S6: the sum of pure red, green and blue (in sRGB) was largely correlating with the power consumption of pure white when you take into account APL (Average Picture Level) brightness adjustments of the display.
To get a meaningful representation of efficiency of the displays, we chart the power curve of the Galaxy S4 (E5410), Galaxy S5 (S801), Galaxy S5 LTEA and finally the newest generation Galaxy S6 at different screen luminance points:
Immediately the Galaxy S4 sticks out as the most power consuming device of the last few generations. One has to keep in mind that most of this power is not due to the display itself, but due to the lack of Panel Self Refresh on past generation devices. PSR is able to achieve better power efficient in static screen scenarios by not re-sending frame-buffer information to the screen’s display controller IC. The DDIC instead buffers the screen contents on-chip and refreshes the screen matrix that way, enabling the SoC’s display controller pipeline to shut down and save on power.
Due to inconsistencies in SoCs, DDICs and general component efficiency, each device starts at a different power value at minimum brightness. For example the Galaxy S5 is able to post by far the best value in this metric as it will consume down to 258mW while idling at minimum brightness. The Galaxy S5 LTEA and Galaxy S6 will use a tad more at around 360mW each. This is likely due to the fact because of the heightened resolution of their 1440p screens compared to the 1080p screen on the Galaxy S5.
To be able to determine the efficiency of the OLEDs themselves though, we have to look at how the luminance curve behaves for each device. To do this, one has to adjust the power numbers to compensate for this base-power consumption:
AMOLED Screen Power Efficiency | ||||||
Device Minimum Power |
Device Max Power (Manual Br.) |
Screen Luminance Power at 200cd/cm² |
mW / cd / cm² (Normalized to 5.1" screen) |
|||
Galaxy S4 | 656 mW | 1792 mW | 653 mW | 3.41 | ||
Galaxy S5 | 258 mW | 1355 mW | 532 mW | 2.66 | ||
Galaxy S5 LTEA | 366 mW | 1326 mW | 605 mW | 3.02 | ||
Galaxy S6 | 358 mW | 1214 mW | 442 mW | 2.21 | ||
Note 4 | 452 mW | 1690 mW | 665 mW | 2.69 |
We see a generational improvement in power efficiency for each new Galaxy S device, except the S5 LTEA. It seems that the switch to 1440p effectively brought itself with a loss in efficiency of the screen and the DDIC / base power consumption. We don’t know the details of the emitter materials used for each generation, but I’ve been told that power efficiency of a sub-pixel should theoretically go down relative to its size. The higher DPI density of the S5 LTEA might be reason for its efficiency degradation.
The Galaxy S6 offers the best evidence of new emitter and efficiency gains as it is even clear in the luminosity curve graph how even though the S6’s base power consumption is higher, it is able to catch up this to this difference and surpass the Galaxy S5 at higher brightness levels. The comparison with the S5 LTEA is the most interesting as both devices sport a 5.1” 1440p display making them perfect for an apples-to-apples comparison. Here the S6’s new display is able to exhibit a substantial 36% improvement in power efficiency.
While the generational power efficiency gains compared to older AMOLED devices is interesting, the question remains if the newest displays are now able to match up to LCD panels in terms of efficiency at high APL values.
To get a better idea how power scales depending on APL, grey-scale various colors, I went ahead graphed over 239 measurement points on several display scenarios on the Galaxy S6.
As expected, we see white being the obvious most power consuming color as it requires high intensity on all color components. We again see the interesting behavior of black and white patterns summing up to a certain %APL consume much more power than an equal grey-scale or mixed image at the same APL. As explained in our review of the Galaxy Note 4 Exynos, this is due to voltage scaling of the intensity levels of the sub-pixels. Actual brightness of the display is controlled by pulse wave modulation on top of the component voltage scaling mechanisms.
I’ve yet to measure more LCD devices to get a better picture of various panel manufacturers and screen technologies, but if we take for example the Huawei P8’s panel we can calculate a luminance-power of 332mW at 200cd/cm². Over the Galaxy S6’s AMOLED screen this still represents a 33% advantage for the LCD technology when displaying white and high level greyscale colours. To reach an equivalent amount of efficiency on the S6 one would have to have about less than 65-70% of solid white in the picture. Unfortunately Android interfaces are still dominated by high APL and white elements, so AMOLED will still trail LCDs in most default UI scenarios when it comes to luminance power. As long as white is avoided, the S6 can already claim it is more efficient than LCD devices in all other scenarios as the break-even point now reaches ~85% greyscale.
The good news though is that this gap keeps decreasing with each generation and the disadvantage is limited to pure white background content. Having even slightly grey or colored content will start shifting the scales back in favour of AMOLED devices. Running dark themes and dark backgrounds can really be advantageous for AMOLED device as they are able to achieve factors of 3-4x in luminance-power advantage over LCD devices.
73 Comments
View All Comments
bernstein - Tuesday, June 23, 2015 - link
well the graph should be redone, it mainly shows device power inprovements not related to the screen (e.g. all the improvements at zero luminance)Andrei Frumusanu - Tuesday, June 23, 2015 - link
I wanted to show that the base power consumption can be a significantly variable metric and that screen efficiency is not everything when a device idles.Andrei Frumusanu - Tuesday, June 23, 2015 - link
The table accounts for base power consumption (Minimum power) at 1-2 nits while the graph shows the total device power. I edited the column label in the table to better explain that.sonicmerlin - Wednesday, June 24, 2015 - link
I'm sorry but that makes absolutely no sense. You wrote: "the Huawei P8’s panel we can calculate a luminance-power of 332mW at 200cd/cm²", but on your graph titled "device luminance power" you include non display power consumption?Then you say the AMOLEDs are almost as good as the P8 LCD, but based on that graph they only consume less power at all black.
Then the table before that graph... Wth are you trying to say? I have no clue what the info means. You have "screen luminance power at 200cd/cm^2", but at what APL? All black? All white?
NeoteriX - Tuesday, June 23, 2015 - link
Do we know where the other phones with AMOLED screens sourced from Samsung stack up? In other words, I believe I've read that current AMOLED phones (various Motorola phones, Nexus 6, etc.) have the generation AMOLED display that is one behind the latest and greatest Samsung had to offer at the time. If that's correct, then for example, at the launch of the Nexus 6, the latest/greatest panel offered by Samsung was in the GS5/Note 4, so it has the equivalent panel as the (power hungry) GS4. Is this correct?Andrei Frumusanu - Tuesday, June 23, 2015 - link
We can't really verify that but it's a good hypothesis.BMNify - Tuesday, June 23, 2015 - link
Samsung always keeps the latest and greatest AMOLED display for themselves and sell the last generation panels to other guys like Motorola, Nokia/Microsoft etc..sabrewings - Tuesday, June 23, 2015 - link
My favorite phones have always had AMOLED displays. LCDs look washed out, even some as beautiful as the 720p (the hotness back in the day) on my HTC Rezound. I just wish that other manufacturers made as good a panel as Samsung. I'm not too keen on having another Samsung phone after my GS5.Nintendo Maniac 64 - Tuesday, June 23, 2015 - link
The obvious solution is LG - they also make their own OLED panels.Duncan Macdonald - Tuesday, June 23, 2015 - link
How much of the efficiency improvement is actually caused by the loss of efficiency with use that AMOLED devices suffer from? Older phones are likely to have been used more which would decrease their efficiency.