Buyer's Guide - Mid-Range, October 2004by Jarred Walton on October 21, 2004 11:00 AM EST
- Posted in
IntroductionChoosing the parts for a computer can be a very difficult and a time-consuming process. There is no perfect system for all tasks, so what it really comes down to is two basic questions: how much do you want to spend, and how do you plan on using the computer? If you ever talk to someone about suggestions on computer parts, and they don't take the time to at least ask these two basic questions before they begin offering advice, we would suggest that at the very least, you get a second opinion before plunking down your hard earned cash on a bunch of exotic sounding parts that you may never need.
For this Guide, the first answer is relatively simple. Our target price is around $1250 for a complete "Mid-Range" system. This is a bit higher than our past Mid-Range systems, but many of your comments indicated that you were willing to spend a little bit more than $1000 for a moderately equipped PC. Not included in the final cost are taxes and an OS. The answer to the second question is much more elaborate, and we will do our best to list various options that we consider to be reasonable for this price segment. We will also include a list of potential upgrades for any of these systems with information on whom we feel will benefit most from the options. One option that we will not dwell on here is gaming performance - we'll take a look at systems tailored specifically for that task in an upcoming Guide.
Our first criterion for selecting parts is to choose components that we feel are reliable. No one wants a computer that crashes periodically due to flaky hardware. It is impossible to guarantee 100% reliability, of course, especially when looking at parts that may be less than a year old, so your own experience may differ from ours. After reliability, performance is the next factor to consider, although it needs to fit within our budget. What we really want, then, is the best price/performance ratio for the type of application that we are looking at - more on that in a moment. Finally, features are also something that we will consider, as if the price and performance are basically the same, more "free stuff" is always a welcome addition.
Building a system that is "everything to everyone" is simply not possible when price is a consideration. Yeah, you could put two Opteron 250 or Xeon 3.6 CPUs in a system with several GB of RAM and a large RAID 5 SCSI array and performance will be exceptional in pretty much any application, but such a system is beyond the budget of most people. In order to get around this, we will be looking at several base system configurations with suggestions on how various components might be adjusted to improve the performance of certain applications. Those who are not interested in the alternative suggestions can stick with the basic setup, but we will focus on upgrades that might be useful for people interested in Content Creation, and Software Development. Any Mid-Range system costing around $1250 should be able to do just about any task well enough for light to moderate use, but saving $50 to $100 on a component that isn't as important for one task and spending it somewhere else where the added performance will be used can help you to get the most out of your computer.
Of course, if you're looking for advice on building a budget system, take a look at our last Entry Level Guide. Such a system is much more cost efficient for those who are looking for a computer for basic email, Internet and office use. If, on the other hand, you want the fastest hardware on the planet and the bragging rights that go with it, check out our latest High End Guide. Here, we will be trying to strike a balance somewhere between those two extremes. The majority of our prices can be found using our Real Time Pricing Engine, although we also use sites such as PriceWatch.com. If you find parts on sale for less than the prices that we list, then that can influence your decision, so by all means, feel free to shop around. Local stores are also an option, and while components usually cost more in that venue, you tend to get better support and the RMA process is usually a matter of minutes or hours rather than weeks.
Post Your CommentPlease log in or sign up to comment.
View All Comments
filterxg - Tuesday, November 2, 2004 - linkI think this type of article is great. I may be in the market in the next 2 months and am reading up. Considering waiting until 64-bit XP comes out. But my Athlon 850 is on its last legs, and no news from Microsoft is bad news for me.
JarredWalton - Tuesday, November 2, 2004 - linkI know what you mean on the tech support side. Problem is, even if I told my mom or whomever to buy a Dell, I *know* that I would end up doing the support. My mom wouldn't even know what the hell to say to a Dell support person. I laugh just thinking about it. (Yeah, I built her a PC so that she can get email. Now I get questions asking me why Juno doesn't work and sometimes crashes. Ugh.)
Also, for those that were wondering about the choice of DVD+R, you can now see where I got the information for the NEC 3500A:
I had the Pioneer in originally, and Kris let me know in advance that the NEC was slightly preferred. Both are good drives, though, so it's not a decisive win in all areas. (Not like anyone is going to see the comment other than HH, but oh well.)
hh - Monday, November 1, 2004 - link> HH - Hobbyist DIY vs. "regular" DIY? I don't
> even know that I gave it that much thought.
It is merely something to consider.
>I actually find it fun to build new PCs.
Glad you enjoy it. My interest is to get on with it to using the PC, not the screwdriver-turning.
I'll still DIY if the cost savings potential is big enough to motivate...the problem is that that bar gets raised progressively higher as I have less free time. If the OEM price premium is less than 10-20%, I'll pay it in a heartbeat.
(Of course, this assumes ojbectively equal products, so we're back to system benchmarks questions).
>Having done plenty of support at companies that
>use Dell and other large OEM PCs, I wouldn't
>recommend them to an individual.
I know and undertand the frustration here. But we've already agreed that DIY's are not for the non-savvy PC user; my mother-in-law is a prime example...she's on dialup but can't figure out how to have the antivirus app do its updates.
>For businesses that can pay the extra $$$ for
>the support contracts, sure, go for it, but
>individual users? I just don't see OEMs as
>providing enough *quality* support to warrant
>my recommendation. YMMV.
The only thing worse than the OEM's are the "Armchair Expert" helpers. Based on their "expert" advice, Mom-in-Law just paid for a hard drive replacement to fix a spyware infection problem.
The frustrating part is that we both know that this failure mode is going to occur again. I'm tempted to convert her over to Apple to stop it, but that would cause a Family fight, especially since Sis-in-law doesn't want to have to admit that the spyware infections are being caused by her kids surfing on their Grandma's PC...
Pass me that bottle of Scotch, would you? :-)
JarredWalton - Friday, October 29, 2004 - linkHH - Hobbyist DIY vs. "regular" DIY? I don't even know that I gave it that much thought. I know that I personally would never go out and buy an OEM desktop system, but I'm probably far from your typical PC user. I actually find it fun to build new PCs. Having done plenty of support at companies that use Dell and other large OEM PCs, I wouldn't recommend them to an individual. For businesses that can pay the extra $$$ for the support contracts, sure, go for it, but individual users? I just don't see OEMs as providing enough *quality* support to warrant my recommendation. YMMV.
BBurk: To get a "quiet" setup, the Antec 3700BQE is a great start. If you really want quiet, add in a Zalman CNPS7000A/B heatsink and fan, as it is again nearly silent. You could replace the PSU with one of the fanless Thermaltake or Antec models - only 350W, but that should suffice, I think. Both Seagate and Samsung make near-silent hard drives, although the latest WD, Maxtor and Hitachi really aren't any worse, I don't think. I just say avoid WD Caviar with non-FDB bearings. Also, if possible, look for a motherboard that doen't use a fan on the northbridge, and if you don't need the graphics power, get a graphics card that uses only a heatsink as well. That would make a system virtually silent, at the cost of some performance (especially on the graphics card).
hh - Thursday, October 28, 2004 - link#48/JarredWalton
>Actually, HH, shipping *was* included...
Sorry, I missed that detail.
> What you don't get are several upgrades that
> most hobbyists would like.
On the contrary. What you apparently missed is that I had very explictly and specifically differentiated DIY'er types upfront and was not talking about the classical hobbiest.
Instead, I was talking about DIY'ers who do it because of the cost savings, and who generally doesn't care a lick about possible future upgrades: they care about are today vs. OEM and usually not much else.
> The case/PSU and motherboard are proprietary
> designs, so if one of those items fails after
> the warranty expires...
A valid if generally negligible risk, due to the classical "Bathtub" shaped reliability curve for electronics. Yes, some OEM's have real garbage, but let's also not overhype this objective risk.
> I realize not everyone can build their own PC,
> but most Anandtech readers are more than
> capable of doing so.
Anotehr truism, but simply not a particularly relevant point to my arguement.
> That's who we target with our Guides.
Are you targeting hobbiest DIY'ers, or all DIY'ers?
I'd say you're really only doing the former.
FWIW, it appears to me that you've essentially assumed that just because one can DIY that one will always DIY. That can be a bad assumption. IMO, this is possibly why some posters asked about benchmark tests, and why I suggested also including OEM systems in such a comparison too, as I was following the classical business case of a "Make or Buy" decision.
Please understand that I'm not Anti-DIY or Pro-OEM: I'm agnostic. Our differences are likely because my criteria for when my time investment in a DIY is justified is different than what yours is, and the net result is that I don't automatically reject all OEM's without even a glance.
BBurk - Thursday, October 28, 2004 - linkWhat reccomendations of changes would you make for a very quiet/silent system? thanks
JarredWalton - Monday, October 25, 2004 - linkActually, HH, shipping *was* included (and added about $50 to the total). That's shipping to the continental US, of course, so if you live somewhere else it would be different.
I put together a Gateway system with a P4 530 and X300SE, 1GB of RAM, 19" monitor, and 2.1 speakers. Including OS and MS Works (which OEM costs $71) we get a total price - shipped with 1 year warranty - of $1364. Adding Works and XP Home to the P4 system in this guide costs $1385. For all intents and purposes, then, it's a tie in price.
If you only want a basic system, then, Gateway would be fine. What you don't get are several upgrades that most hobbyists would like. Better graphics, better speakers, better monitor, better case, better motherboard, etc. Gateway will give decent parts in each category, but the emphasis will be on cutting costs.
The case/PSU and motherboard are proprietary designs, so if one of those items fails after the warranty expires, your only choice is to either buy an expensive replacement from Gateway, or else buy a new case, PSU, and motherboard. Proprietary designs are a really bad thing, people. I would spend more money at a local computer shop for a "generic" PC rather than buy a Dell or Gateway or other OEM.
My rate for building a PC and installing the OS is $100, which is pretty typical. That amounts to about $25 an hour. If I wanted to cut $100 out of the system cost by going with cheaper components in every area, I could certainly do so, but then reliability is compromised.
I realize not everyone can build their own PC, but most Anandtech readers are more than capable of doing so. That's who we target with our Guides. Some people think that OEM systems are more reliable due to their warranties and such, but that's not the case in my experience. I would say 90% of the PCs people ask me to help fix are OEM designs. Maybe that's because the non-OEM systems are built by people that can manage on their own, or maybe it's because the parts don't fail as often. I know what I think, but you're entitled to your opinion.
The only caveat is that I won't build a PC for someone that knows nothing about computers. I can't provide 24/7 tech support. OEMs do give you that, although the quality of the provided support is questionable. :)
hh - Monday, October 25, 2004 - link#40/Jarred Walton
> #34 brings up an interesting argument.
Thanks for the compliment.
> If you actually went out and bought the same hardware that goes into [an OEM], the price would be a lot lower than what is listed here...The price of OEM systems appears attractive, but in the end you get what you pay for.
I agree, but offer an alternative perspective. In my view, the're two very common shortcomings in the DIY-vs-OEM arguements.
The first is trying to decide/define equivalency. Its too easy to get lost down in the weeds (specific components, etc) and essentially ignore system performance.
For example, I can put together a "kinda looks equivalent" Gateway for $1319 or buy the one DIY and add the OS for $1304 - - - a whopping $15 cost savings for skipping the OEM's assembly, warranty and copy of MS-Works software. The catch here is that the OEM's probably doesn't benchmark at 100% of the DIY, but how close is good enough? 99%? 95%? 90%? 80%?
There is no simple, cut and dry answer to this question: its a personal opinion based on what significance rankings and (cash) value you want to put on the differences between the two contenders.
The second shortcoming is in how we choose to count our costs. For example, this article ignored shipping costs, probably because we all know that they'll be different for all of us.
But in the similar fashion, we also commonly ignore how much our labor is worth when we do a DIY assembly. And we can argue that we do this because we'll all put different values on how much our time is worth.
But the real bottom line is that our free time is never worth nothing, despite the fact that we invariably choose to ignore it in the cost of doing a DIY PC build, which results in faulty accounting for how much we're really saving.
FWIW, if anyone really wants to claim that their free time really is worth zero dollars, I have a lot of chores for you to come over and do at my house...heck, I'll even pay a whole $5/hour :-) Funny thing is that I don't ever get any takers at this hourly rate...it seems that everyone knows that their time is worth more than this, and yet never includes it in their DIY budget. Hmmm. :-)
TrogdorJW - Monday, October 25, 2004 - link#45: XP Home will actually work with up to two CPUs, I believe. Someone can correct me if I'm wrong. Anyway, I *think* that MS actually recognizes HyperThreading at a low level and only counts it as one CPU even though it show up as two. Anyone out there able to confirm that for sure?
slashbinslashbash - Sunday, October 24, 2004 - link2 things:
1) XP Home still isn't SMP-enabled, right? Therefore shouldn't the recommendation be XP Pro if you get an Intel (Hyperthreaded) setup?
2) Gamers (and others griping about the 9600Pro in this guide) should look to the Overclocking Buyer's Guide released about a month ago. That guide included a 6800GT in a system costing $1113 (without monitor/keyboard/mouse/etc). Downgrading to a 9800Pro would leave the system comparably priced to the systems in this Midrange guide. Also, the case/PSU in that guide was pretty expensive as well.