Data storage requirements have seen an exponential increase over the last several years. Both cloud and local storage requirements continue to be served by hard drives where workloads are either largely sequential or not performance sensitive. While the advancements in storage capacity have primarily served the interests of datacenters (enabling more storage capacity per rack), the products have trickled down to consumers in the form of drives for NAS (network-attached storage) units and pre-installed in external / DAS (direct-attached storage) enclosures. Seagate is the only one of the three hard drive vendors to target the desktop storage market with their highest capacity drives. We looked at the 10TB BarraCuda Pro drive last year, and the 12TB follow-up was launched last month.


The Seagate BarraCuda Pro 12TB is a 7200RPM SATAIII (6 Gbps) hard drive with a 256MB multi-segmented DRAM cache. It features eight PMR platters with a 923 Gb/in2 areal density in a sealed enclosure filled with helium. According to Seagate, it typically draws around 7.8W, making it one of the most power efficient high-capacity 3.5" hard drives in the market. It targets creative professionals with high-performance desktops, home servers and/or direct-attached storage units. It is meant for 24x7 usage (unlike traditional desktop-class hard drives) and carries a workload rating of 300TB/year, backed by a 5-year warranty. It also comes with a bundled data-recovery service (available for 2 years from date of purchase). The various aspects of the drive are summarized in the table below.

Seagate BarraCuda Pro 12TB Specifications
Model Number ST12000DM0007
Interface SATA 6 Gbps
Sector Size / AF 4096
Rotational Speed 7200 RPM
Cache 256 MB (Multi-segmented)
Rated Load / Unload Cycles 300 K
Non-Recoverable Read Errors / Bits Read < 1 in 1015
MTBF 1M hours
Rated Workload ~ 300 TB/yr
Operating Temperature Range 0 to 60 C
Physical Parameters 14.7 x 10.19 x 2.61 cm; 705 g
Warranty 5 years
Street Price (in USD, as-on-date) $500

Note that the weight has increased compared to the 10TB drive introduced last year. While the 10TB version had seven platters, the 12TB one bumps it up to eight.

A high-level overview of the various supported SATA features is provided by HD Tune Pro, and shows support for common mechanical features such as NCQ.

The main focus of our evaluation is the performance of the HDD as an internal disk drive in a PC. The other suggested use-case for the BarraCuda Pro is in direct-attached storage devices. The evaluation in these two modes was done with the help of our direct-attached storage testbed.

The internal drive scenario was tested by connecting the drive to one of the SATA ports off the PCH, while the Akitio Thunder3 Duo Pro was used for evaluating the performance in a DAS. The Thunder3 Duo Pro was connected to one of our testbed's Thunderbolt 3 Type-C port. The controller itself connects to the Z170 PCH via a PCIe 3.0 x4 link.

AnandTech DAS Testbed Configuration
Motherboard GIGABYTE Z170X-UD5 TH ATX
CPU Intel Core i5-6600K
Memory G.Skill Ripjaws 4 F4-2133C15-8GRR
32 GB ( 4x 8GB)
DDR4-2133 @ 15-15-15-35
OS Drive Samsung SM951 MZVPV256 NVMe 256 GB
SATA Devices Corsair Neutron XT SSD 480 GB
Intel SSD 730 Series 480 GB
Add-on Card None
Chassis Cooler Master HAF XB EVO
PSU Cooler Master V750 750 W
OS Windows 10 Pro x64
Thanks to Cooler Master, GIGABYTE, G.Skill and Intel for the build components

The full details of the reasoning behind choosing the above build components can be found here.


Performance - Internal Storage Mode
Comments Locked


View All Comments

  • ddrіver - Wednesday, November 15, 2017 - link

    "Conventional" magnetic recording is "giant magneto resistor recording". So what you're saying doesn't make sense.
  • takeshi7 - Thursday, November 16, 2017 - link

    It makes perfect sense. CMR is how hard drives have stored data on tracks since their inception in the 1950's. SMR is a different strategy for writing the tracks that has the writer overlap with previously written tracks to increase track density.

    "Shingled" magnetic recording is also "giant magneto resistor recording". So that's not a good way to differentiate between them.
  • ddrіver - Thursday, November 16, 2017 - link

    If CMR was the way HDDs worked from the inception then why would you call SMR anything other than that? They're all the same. Magnet. Poles. Everything else is buzzwords the industry is feeding you to make you buy more and more. And the sheeple buy.
  • cm2187 - Wednesday, November 15, 2017 - link

    Important question for usage in consumer NAS: how noisy is it?
  • ganeshts - Wednesday, November 15, 2017 - link

    All hard drives make noise - particularly if there are lots of random accesses making the heads move around a lot, and I don't think this was any more noisy than other disks that I have evaluated before. Spec sheets put it in the same category as everyone else - 28 dB typical / 30 dB max at idle, 32 dB typical / 34 dB max for performance seeks.

    To be honest, no one has brought up this aspect before, and I don't think
  • Ahnilated - Wednesday, November 15, 2017 - link

    Do people still buy Seagate's stuff? Their HDD's have a notoriously high level of failure.
  • coburn_c - Wednesday, November 15, 2017 - link

    I don't think that's true anymore.
  • haukionkannel - Wednesday, November 15, 2017 - link

    Yep, that was a long time ago.
  • Senti - Wednesday, November 15, 2017 - link

    Nop, it's still very true. Seagate still holds undisputed first place on HDD failure %.
  • CheapSushi - Thursday, November 16, 2017 - link

    I believe that was just mainly for their 3TB or 4TB variants.

Log in

Don't have an account? Sign up now