The storage industry is getting exciting again. In order to increase capacity of NAND SSDs, there are two different routes being taken: either increase the number of bits per cell from 3bpc (TLC) to 4bpc (QLC) for a 33% increase, or increase the number of TLC layers per chip from 64 layers to 96 layers for a 50% increase. Each method has benefits and issues, however we have been waiting for the two technologies to actually be found on upcoming drives (rather than just on a press release). As part of the show we found a 4 TB SATA-based drive using a Maxio Technology controller and Intel's latest QLC NAND flash. We also scored some data on the speeds, as well as the state of play of the technologies.

A Prototype 4TB Intel QLC SSD

Intel and Micron are currently shipping 3D QLC NAND-based SSDs to enterprise customers who may intend to use them for WORM (write-once read many) applications or as HDD replacements. While it was obvious that this type of flash memory will eventually find its way to consumer applications at some point, it looks like this will happen earlier than expected. Maxio Technology, a developer of SSD controllers, demonstrated a prototype of its SSD featuring Intel’s 3D QLC NAND memory.

Maxio’s prototype drive is based on the MAS0902A-B2C DRAM-less controller as well as Intel’s N18A 3D QLC memory. The controller features two processing cores and supports a number of Maxio’s proprietary technologies, including AgileECC 2, WriteBooster 2 (SLC caching), Virtual Parity Recovery, and so on. This controller is apparently one of the smallest around, as Maxio stated that it is built on GlobalFoundries' 40 nm process.

UPDATE 6/15: Maxio contacted us to correct its initial statement regarding the manufacturing technology used to make its controller. The company uses GlobalFoundries' planar 40 nm fabrication process to make the MAS0902A chip.

It is noteworthy that while Intel/Micron mentioned that their QLC NAND memory can handle around 1000 program/erase cycles, Maxio states that with its controller this number may not be that high. Maxio was keen to point out that this is a prototype drive using early memory, and it expects that the final version of the NAND to be a lot higher.

A side note about QLC: with more voltage levels per cell, it can be more difficult to read a cell due to voltage drift, and error correcting algorithms are in place to reduce signal bit errors caused by drift. When using cells that contain a higher number of bits, these algorithms have to work hardware to ensure data integrity, which can lead to higher power consumption or more transistors being needed in the controller. It can also have a knock on affect of reducing overall P/E cycles of the memory, which in part could be why this demo was not rated at the full 1000 cycles right now.

The current P/E rating, which may be good enough for high-capacity consumer SSDs where 0.3 DWPD is a typical rating for inexpensive SATA drives with 3D TLC NAND, may not be good enough for applications that require more writes (though, this is not a problem for WORM). Meanwhile, as Maxio and other developers of controllers are learning more about QLC, the endurance rating of memory with their controllers will increase.

From performance point of view, the 4 TB 3D QLC SATA SSD is on par with drives based on various types of 3D TLC NAND, which is not particularly surprising as modern SATA SSDs reach SATA limitations. When it comes to actual numbers, the SSD provides up to 562 MB/s sequential read speed and up to 530 MB/s sequential write speed. Meanwhile, for those who need higher performance, there is the MAS0901 controller that supports DRAM.

The 4 TB drive that Maxio is demonstrating is essentially a 2.5-inch PCB containing four multi-layer NAND memory packages that still feature an ES (engineering sample) status, so it is not like Maxio can ship this design straightaway. Anyhow, 4 TB of NAND in just four packages certainly look impressive.

Maxio sells turnkey SSD solutions, but not complete drives. Therefore, the company cannot make statements regarding retail availability of SSDs based on Intel’s N18A 3D QLC NAND memory and the MAS902A controller. In fact, it is not even completely clear how an SSD supplier would position such a product: 4 TB SATA drive is an overkill for consumers, whereas lower capacities may not look really attractive keeping in mind the current endurance rating of the N18A memory with the MAS0902A-B2C. Meanwhile, 4 TB is not necessary enough for an HDD replacement in datacenters. For what it’s worth, the demonstration of a QLC-based SSD indicates that the new type of memory is here and is heading to all market segments.

Update: Certain specifications about the Intel QLC that were initially published with this article have been removed at the request of Maxio Technology while the product is still in the prototype stages. When we get final numbers, we will publish a news story to confirm them.

Want to keep up to date with all of our Computex 2018 Coverage?
 
Laptops
 
Hardware
 
Chips
 
Follow AnandTech's breaking news here!
Comments Locked

45 Comments

View All Comments

  • Lolimaster - Sunday, June 10, 2018 - link

    Those test are only using the cache part of the SLC, another story would be if you go with a 10-20-40GB test were the "SLC" cache is rendered useless and performance will drop to hell.
  • dromoxen - Sunday, June 10, 2018 - link

    Is there really a large market among consumers for this ? I have seen chinese ssds selling for £25 for 120gb £45 for 240 etc so this will have to have some mighty cost reductions , better than the 33% increase in capacity would suggest. And dram less? doesn't that automatically increase the wear ratio
  • peevee - Sunday, June 10, 2018 - link

    "Maxio’s prototype drive is based on the MAS0902A-B2C DRAM-less controller"

    Sorry, QLC and DRAMless is a horrible idea. QLC needs plenty of DRAM and SLC or XPoint cache. Then it is a great tech. In 3 years everybody in value markets will be on QLC.
    And why would QLC and 96 (or 128 etc) layers be exclusive of each other?
  • WatcherCK - Sunday, June 10, 2018 - link

    Is there an application that can give R/W summaries to a disk per program, or an online resource that gives typical disk usage totals for various programs under normal use, it would be nice to have something that lets you plug in your disk type and a program and see what the (conservative) longevity for that drive will be based on what it is used for...

    For example on a new (moderate budget + gaming focused) build right now I would get something along the lines of an NVMe 512GB 3D TLC drive for system and a SATA 1TB drive as a steam/gog/origin/uplay library drive... maybe soon to be replaced with a QLC based SATA drive?
  • Lolimaster - Monday, June 11, 2018 - link

    Right now win10 is the biggest offender with tons of hidden updates/hidden updates for spyware, browsers too updating their db files and other things. At least on firefox you can change the rate the data is rebuilt/saved from every 15secs to something like 5-10mins.
  • Impulses - Monday, June 11, 2018 - link

    That's the way I went with my current build a couple years ago, 256GB SM951 (AHCI version but NVMe didn't change things drastically for it) for the OS plus a 1TB SATA EVO for daily stuff, added a second one when they were dropping darn near $300... Didn't think it'd take years for 2TB SATA drives to drop < $400, heh.

Log in

Don't have an account? Sign up now