ASRock Shows DeskMini GTX/RX, using Micro-STX Motherboard with MXM Supportby Ian Cutress on January 18, 2017 3:00 PM EST
One of the recurring themes in my discussions with motherboard manufacturers over the past several years is one of introducing differentiation to products and through that, new form factors. When mini-STX was shown by Intel last year as a different form factor focusing just on the processor rather than PCIe lanes, we saw the launch of several small-sized PCs, mainly for embedded functions, that could leverage a full desktop-class CPU and socket. As always with CPU-only products, some users request a little more graphics oomph, so insert ASRock’s new ‘micro-STX’ type of motherboard and mini-PC that uses MXM-type graphics.
Unfortunately our trip to ASRock at CES was curtailed due to other meetings overrunning, but it was interesting to note that ASRock was at the show formally with a suite, rather than just casually taking coffee meetings the previous two years that I had been. So all our pictures in this piece are from the Small Form Factor Network, and many thanks to them.
The mini-STX form factor is based around a 5-inch by 5-inch motherboard design, which gets you enough space for a socket, some memory and some IO. With this micro-STX motherboard, ASRock is clearly going at length to support more: the MXM module bay takes up the whole second half of the motherboard, and one key thing to note here is the socket area.
On the left-hand side, where we would normally expect to see the IO, we have Intel’s recommended socket area marked. Normally this is left near-blank to account for coolers and such, but ASRock as engineered the rear IO right up to the socket itself, and using low profile IO ports to allow a cooler to fit. Because of the way mini-STX platforms work with few power phases, these are solely above the socket as not to interfere with to the left of the socket.
On the front side of the board, the chipset is nowhere to be found. That’s because it is on the back, along with the CR2032 battery and three M.2 ports. Because of the chipset support, all three are PCIe 3.0 x4 capable, with spacing for 2260 and 2280 sized M.2 ports. For good measure, there’s also an M.2 WiFi port.
Front functionality comes through a USB 3.0 Type-A, a USB 3.0 Type-C (ASRock in their sign claim this is USB 3.1 and Thunderbolt 3, however I cannot see an ASMedia ASM1142/ASM2142 nor an Alpine Ridge controller for this), and two audio jacks from the Realtek ALC283. The front uses an Intel I219-V gigabit Ethernet controller, two USB 3.0 ports, an HDMI port, HDMI 2.0 port (via MCDP2000), a DisplayPort adaptor, a mini-DP port, and a DC-In jack.
It’s worth noting that the specifications list also has two SATA ports on the description, but like the TB3 controller, I can’t see them on the pictures, front or rear.
As a system, the 2.7-liter DeskMini GTX/RX will feature a Core i7-7700K using an Intel stock cooler (so don’t expect much in the way of overclocking), support for up to 16GB of DDR4-3200 SODIMM (not sure why it’s not 32GB, perhaps z-height?), a 128GB Samsung 961 M.2 SSD, and an MXM Type-B graphics card: either a GTX 1060 for the GTX model, or an AMD RX card for the RX version. The PSU is rated at 220W, which can limit options.
Personally, I’d prefer a solid copper cooler on there for a Core i7, but a Core i5/i3 would do OK with the stock cooler.
Prices and release date are unknown.
Source: SFF Network
Post Your CommentPlease log in or sign up to comment.
View All Comments
TheinsanegamerN - Thursday, January 19, 2017 - linkand what tablet would get anywhere close to a 1080's performance?
If this takes off, we could have a whole range of NUC sized mini boxes with serious hardware. That would be awesome.
guidryp - Wednesday, January 18, 2017 - linkI am definitely in favor of some new form factors with GPU support. Mini-ITX leads to issues. The way the GPU hangs off the edge in points down (in vertical cases), means either:
You make the case a lot bigger to have space, or the GPU is cramped for air, or you put in a giant dust admitting cutout to help with cramping. I don't particularly like any of these options.
So if I was building today, I would either stick with Micro ATX if using a GPU, or skip GPU and go with an ultra small case.
There just doesn't seem to be a good small + GPU form factor option that I like. There are some kludgy horizontal adaptors for the Mini-ITX slot, but they leave the GPU point the CPU at the bottom of the case, so again, something of a problem.
A real horizontal MXM GPU form factor that got widely used might be an answer, though I am not sure this is exactly the right one. I am thinking more Mini ITX + MXM, and don't mess with the standard CPU area to shave a few mm.
xenol - Wednesday, January 18, 2017 - linkThis would be great if we can find MXM boards for a decent price, rather than say $800 for a GTX 970M or 980M on eBay
nathanddrews - Wednesday, January 18, 2017 - linkI agree, it would be great. If more boards come out with this type of connectivity, maybe they will drop in price as more people buy them?
TheinsanegamerN - Thursday, January 19, 2017 - linkit could also drop if asrock provides a single place to buy new ones. Supply would have a chance to catch up with demand.
keeepcool - Wednesday, January 18, 2017 - link1070N from MSI that will work on regular MXM3.0b slots are around 800€ on ebay and other specialty laptop mxm sellers.
DanNeely - Wednesday, January 18, 2017 - linkReading the specifications I wonder if the sata ports are done via M.2 to SATA dongles.
Valantar - Thursday, January 19, 2017 - linkI'm pretty sure the SATA connectors are the two odd-looking compact connectors next to the m.2 slots. They look similar to connectors like this seen in NUCs and other UCFF PCs that combine SATA+power into a single low-profile connector.
Cygni - Wednesday, January 18, 2017 - link"Personally, I’d prefer a solid copper cooler on there for a Core i7, but a Core i5/i3 would do OK with the stock cooler."
Of the 7 Skylake and Kaby Lake i7's in intel's desktop stack, 5 are 65w or below. Perhaps this sentence would be better worded by talking about K-series CPU's, instead of focusing on i7 vs i5/i3, which isn't very relevant in 2017.
cilvre - Wednesday, January 18, 2017 - linkThe 2 sata ports are to the left of the m.2 slots. it looks like a proprietary cabling similar to laptop cables that lock down onto the pcb.